1、本机是我公司自主研发的一款经济实用型钻孔植毛机，适合于中小型企业，整体机型小，节省占地空间，价格低廉，经济实用。

　　

　　This economic and practical type drilling and tufting machine was designed and produced by the company suitable for small and medium enterprises usages. The machine is compact in size, occupied less floor space, lower prices, and economic to use.

　　

　　2、钻孔植毛同步进行，减少因塑胶棍向前膨胀伸长导致刷棍孔位不正，植不上毛或植毛后没有拉力。

　　

　　Drilling and tufting can be performed in synchronization so as to lessen the side effect of the plastic roller expansion. If when the whole piece of the roller was drilled first, then when tufting is performed, the plastic roller will experience expansion and hence drilled hole positions will be changed and thus tufting precisely inside holes are impossible as the roller is long and thus would affect the pulling forces of the bristles tufted.

　　

　　3、两轴独立运行，适合做任何大型木棍或塑胶棍的圆棍刷钻孔植毛。

　　

　　Two independent axis working suitable for all large wooden roller or plastic roller brushes drilling and tufting.

　　

　　4、一个钻孔头，一个植毛头，可单钻孔单植毛，也可以钻孔植毛同时进行。

　　

　　One drilling head, one tufting head, it can be single drill, single tuft, or drilling and tufting at the same time.

　　

　　5、钻孔植毛孔位编程只需输入几个重要参数，即可由电脑自动完成，计算准确，操作简单，换款方便。

　　

　　Just input several parameters to finish the data input, the rest will be handled by the controller, precise, simple and easy for change over.

　　

　　6、机头是采用我公司已使用多年、技术性能均已相当成熟稳定的马钉机头， 结构简单，维修方便快捷。更适合生产马尾、猪鬃、植物鬃、0.06——1.2mm的各种尼龙毛、PP毛等。

　　

　　Our staple type tuft heads have been used in the market for many years that the stability can be ensured, simple construction, easy for maintenance. It is also suitable for horse tail bristle, boar bristle, natural bristle, nylon bristles from 0.06-1.2mm diameters, PP bristles etc.

　　

　　7、毛箱容量大，可以双色植毛，也可以左、右毛箱同时使用，当使用右毛箱时，左毛箱放毛料，当右毛箱毛料快用完时，机器会自动切换到左毛箱，这时右毛箱放毛料，使操作工的放毛运作完全不会影响到植毛效果，也提高了工作效率。

　　

　　Large capacity of the bristle container. It can be of double color tufting. Or making use of the left and right side of the chambers that when one chamber of bristle has been used up, then use the other side chamber and fill up bristles in the drained up chamber while the machine is running. In this way, it will not affect the tufting quality and also increase the production efficiency.

　　

　　8、正常运行时，夹具可承受重达120KG的棍刷，配有大功率的伺服马达，速度快，定位精度高。

　　

　　In normal operation, fixture can bear the brush roller weight of up to 120kg as it is equipped with high power SERVO motors with high speed, and precise positioning.

　　

　　9、加工棍刷直径：50——280mm，加工长度：500——3500mm。

　　

　　Suitable for brush roller diameter from 50-280mm,And length of from 500-3500mm

　　

　　10、钻孔孔径：直径1.0——10.0mm，植毛孔径：直径3.0——7.0mm，孔径不同只需更换部分配件即可。

　　

　　Suitable for hole drilling diameter from 1.0-10.0mm,And tufting diameter from 3.0 to 7.0mm.For different size of holes, some parts has to be changed to be compatible.